Wood Chip Belt Conveyor

Wood Chip Belt Conveyor 1.for wood chip production line 2.width of belt 500-1200mm 3.length 12-30m

 

 

Belt Conveyor for Wood Chip

 Belt Conveyor is composed of the running part (hopper with traction tape), with the upper section of drive rollers, tension rollers with the lower part of section, intermediate casing, drives, reverse brake rigging, etc. It is suitable for transport bulk of density less than 2.5t/m3, granular and small particle bulk materials upward, such as coal, sand, coke at the end, cement, broken ore. The machine is characterized by rapid centrifugal discharge: and use the rubber conveyor belt as traction members.So it is not suitable for the block and  resistance of materials. The temperature of transported material must not exceed 600C, such as when using heat-resistant rubber is no more than 2000C. 

Features:

1traction parts are made of high strength rubber conveyor belt with high tensile strength, long service life.2the whole structure is simple, easy to install, easy to adjust, repair and maintenance.3pulling pieces of high-strength is low-alloy Ring chain, after appropriating heat treatment, it has high tensile strength and abrasion resistance, long service life

technical parameters:

 

belt width(mm)	convey length(m)           power(kw)				speed(m/S)	capacity(t/h)
400	≤12m	1.5 kw	12-202.2-4	20-253.5-7.5	1.3-1.6	40-80
500	≤12m	3kw	12-204-5.5	20-305.5-7.5	1.3-1.6	40-80
650	≤12m	4kw	12-205.5	20-307.5-11	1.3-1.6	131-323
800	≤6m	4kw	6-155.5	15-307.5-15	1.3-1.6	278-546
1000	≤10m	5.5kw	10-207.5-11	20-4011-12	1.3-2.0	435-853
1200	≤10m	7.5kw	10-2011	20-4015-30	1.3-2.0	655-1284

 for more detail, pls call : 0086-18237112102

Wood Chip Belt Conveyor